Kessel Comfort 400V Mono Instructions De Pose Et D'utilisation page 43

7 Overview of configuration menu
Overview menu
The control menu is split into four menu areas:
0 System info - selected system, configured sensors, cur-
rent measured values; if applicable, events or error mes-
sages
1 Information - display of the operating data (e.g. voltage,
current measured values, logbook or set parameters)
2 Maintenance - maintenance-relevant tasks (e.g. switch
pump(s) on/off), self-diagnosis, maintenance date and inter-
val)
3 Settings - setting of the switching levels, sensor and sys-
tem configuration, configuration of the modem interface,
resetting the control unit
Menu texts Comfort 400V
0. System info
1. Information
1.1 Hours of operation
1.2 Log book
1.3 Control type
1.4 Maintenance date
1.5 Current measured values
1.6. Parameters
2 Maintenance
2.1 Automatic operation
2.2 SDS
2.3 Maintenance date
010-532_13
(1)
1.1.1 Total running time
1.1.2 Run time pump 1
1.1.3 Run time pump 2
1.1.4 Starts pump 1
1.1.5 Starts pump 2
1.1.6 Power outage
1.1.7 Energy usage
1.4.1 Last maintenance
1.4.2 Next maintenance
1.5.1 Mains voltage
1.5.2 Mains power
1.5.3 Battery voltage
1.5.4 Filling level
1.6.1 Sensor height
1.6.2 Switch lock
1.6.3 Measuring range
1.6.4 On 1 - level
1.6.5 On 2 - level
1.6.6 Off 1 - Level
1.6.7 Alarm level
1.6.8 On delay
1.6.9 Post run time
1.6.10 Max. run time
1.6.11 Max. run occur
1.6.12 Min. current
1.6.13 Max. current
1.6.14 LEP offset
1.6.15 auto SDS
1.6.16 S1/S3 operation
2.1.1 Automatic operation
2.3.1 Last maintenance
Installation and operating manual
Number of the menu item
h 0 - 999,999.99
h 0 - 999,999.99
h 0 - 999,999.99
X 0 - 999,999
X 0 - 999,999
h 0 - 999,999.99
kWh 0 - 999,999.99
hh:mm:ss - dd.mm.yyyy
hh:mm:ss - dd.mm.yyyy
V 0 - 999.9
A 0 - 99.9
V 0 - 99.9
mmWS 0 - 9999
mm 0 - 999
s 0 - 30
mm 0 - 5000
mm 0 - 999
mm 0 - 999
mm 0 - 999
mm 0 - 999
s 0 - 10
s 0 - 30
min 0 - 640
x 5 - 30
A 0.0 - 5.0
A 0.0 - 16.0
mm 0 - 100
d 0 - 14
Auto/Off
hh:mm:ss - dd.mm.yyyy
43 / 140