Kessel Comfort 400V Mono Instructions De Pose Et D'utilisation page 24

1 Notes on this manual
This document represents the original operating instructions. The original operating instructions are written in German. All
other language versions of these instructions are a translation of the original operating instructions.
The following notes make it easier to navigate the manual:
Symbol
(5)
Check whether manual control has been
activated.
Press OK.
System is ready for operation.
see "Safety", page 25
|Define maintenance interval|
Bold type
Italics
The following symbols are used:
Icon
WARNING
CAUTION
24 / 140
...
Variants or additional information (e.g. applicable only for ATEX variants)
Technical information or instructions which must be paid particular attention.
WEEE icon, product is subject to the RoHS Directive
Warns of a hazard for persons. Disregarding
Warns of a hazard for persons and material. Disregarding
The product fulfils the requirements for potentially explosive atmospheres (ATEX)
Warning of potentially explosive atmospheres
Installation and operating manual
Explanation
Position number 5 from the adjacent figure
Action step in figure
Prerequisite for action
Action step
Result of action
Cross-reference to Chapter 2
Screen text
Particularly important or safety-related information
Meaning
Isolate device!
Observe the instructions for use
CE marking
Warning, electricity
this warning can lead to very serious
injuries or death.
this warning can lead to serious
injuries and material damage.
010-532_13