Publicité
3. Perform one of the following operations, in accordance with the trigger source that was
selected in step 2.
If this is the trigger
source:
[EXE] key
Count Down
CH1
SONIC
Mic
[START] key
To specify the countdown start time
u
1. Move the highlighting to "Timer".
2. Press 1(Time) to display a dialog box for specifying the countdown start time.
3. Input a value in seconds from 1 to 10.
4. Press w to finalize Trigger Setup and return to the Advanced Setup menu.
To specify microphone sensitivity
u
1. Move the highlighting to "Sense" and then press one of the function keys describe below.
To select this level of microphone sensitivity:
Low
Medium
High
2. Press w to finalize Trigger Setup and return to the Advanced Setup menu (page 3-1).
3-10
Using Advanced Setup
Do this next:
Press w to finalize Trigger Setup and return to the Advanced
Setup menu.
Specify the countdown start time. See "To specify the
countdown start time" below.
Specify the trigger threshold value and trigger edge direction.
See "To specify the trigger threshold value and trigger edge
type", "To configure trigger threshold, trigger start edge, and
trigger end edge settings" on page 3-11 or "To configure
Photogate trigger start and end settings" on page 3-12.
Specify the trigger threshold value and motion sensor level.
See "To specify the trigger threshold value and motion sensor
level" on page 3-12.
Specify microphone sensitivity. See "To specify microphone
sensitivity" below.
Press w to finalize Trigger Setup and return to the Advanced
Setup menu.
Press this key:
1(Low)
2(Mid)
3(High)
Publicité
