SICK GL6L Notice D'instruction page 8

OPERATING INSTRUCTION
4 Mounting
en
5 Electrical installation
8 O P E R A T I N G I N S T R U C T I O N | GL6L
Green LED: Supply voltage active
3
GL6L-xxx3x
Sensor which it is not possible to set: The sensor is adjusted and ready for operation.
3
2 3
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
The sensors must be connected in a voltage-free state (U
tion must be observed depending on the connection type:
– Plug connection: pin assignment
– Cable: wire color
Only apply voltage/switch on the voltage supply (U
tions have been established.
Explanation of connection terminology:
BN = Brown
WH = White
BU = Blue
BK = Black
n. c. = no connection
Q = switching output 1
Q = switching output 2
L+ = supply voltage (Uv)
M = common
L.ON = light operate
D.ON = dark operate
2
= 0 V). The following informa‐
V
> 0 V) once all electrical connec‐
V
8025389.1K3A/2023/07/04 | SICK
Subject to change without notice