Keysight E36150 Serie Guide D'utilisation page 85

Step Arb (Option E36150ADVU)
Step 1– Select Arb waveform
Press Arb to access the Arb selection menu. Then select Step.
Press Back to return to Arb main menu.
Step 2 – Configure the Step Arbs
Configure the Step Arb accordingly. Refer to the below table for details.
Parameter Available Key Settings
Arb Type Voltage or Current
Start Setting (I0 or minimum to maximum
V0)
End Setting (I1 or minimum to maximum
V1)
Delay (t0) 0 – 3600 s
End time (t1) 0 – 3600 s
Keysight E36150 Series User's Guide
Sets the output Arb type.
Default is Voltage.
Action required:
Press Arb Type to toggle between Volt and Curr.
Volt Selects voltage as output Arb type.
Curr Selects current as output Arb type.
Sets the setting before the step.
Sets the setting after the step.
Sets the delay time after the trigger is received but before the step occurs.
Sets the time the output remains at the end setting after the step occurs.
Description
85