Keysight E36150 Serie Guide D'utilisation page 104

Parameter Available Key Settings
Change Out Type List, Step, Ramp,
Staircase, Sine, Pulse,
Trapezoid, or Exponent
Edit
Properties >
After Arb DC or LAST
104
Selects an Arb for the selected step.
Default is Pulse.
Action required:
Press Change Out Type and select the Arb waveform.
List Selects the List Arb.
Step Selects the Step Arb.
Ramp Selects the Ramp Arb.
Staircase Selects the Staircase Arb.
Sine Selects the Sine Arb.
Pulse Selects the Pulse Arb.
Trapezoid Selects the Trapezoid Arb.
Exponent Selects the Exponential Arb.
Edit the selected Arb waveform.
Example of the Pulse waveform edit fields are shown below:
Move to the Next Step - specifies the step pacing, either dwell or trigger-paced.
Repeat Count - specifies how many times the Arb repeats. The repeat count can be set up to
16,777,216.
Continuous - can only be selected if the Arb is trigger-paced.
Specifies what happens to the parameter settings when the Arb sequence completes.
Default is DC.
Action required:
Press After Arb to toggle between DC and LAST.
DC (Return to DC The parameter setting returns to the DC value that was in effect prior
Value) to the Arb.
LAST (Last List The parameter setting remains at the last Arb value.
Value)
Description
Keysight E36150 Series User's Guide