Télécharger Imprimer la page

Keysight E36150 Serie Guide D'utilisation page 78

Alimentation cc à sélection automatique

Publicité

Les langues disponibles

Les langues disponibles

Step 3 – Configure the List properties
Configure the Voltage, Current, Time, BOST, and EOST accordingly. Use the navigation keys to select the field; use
the numeric entry keys to enter the value. The value is set when you press [Enter].
Fields
Voltage
Sets the voltage value for selected step in voltage.
Current
Sets the current value for selected step in ampere.
Time
Sets the run-time for selected step in seconds.
BOST
Enables check box to set which step will generate a trigger-out signal at the beginning of the step (BOST).
EOST
Enables check box to set which step will generate a trigger-out signal at the end of the step (EOST).
For additional settings, press Properties to open the Arb (List) Properties window.
Configure the List Arb accordingly. Refer to the below table for details.
78
Description
Keysight E36150 Series User's Guide

Publicité

loading