Publicité
Les langues disponibles
Les langues disponibles
Front Panel Menu Reference
This is an overview of the front-panel menus. Press the softkeys to access the front panel menus.
Menu heading
Source Settings >
Curr Range
Sense
Out Pref
Protection >
Voltage Slew>
Output Settings >
On/Off Coupling >
Output Inhibit >
Arb >
Arb List >
Run/Stopped
Add
Delete
Clear All
Properties >
Data Logger >
Datalog Run Stop
Knob Scale Ofs
Marker Off On
Properties >
Auto Scale
Utilities >
Store/Recall >
I/O Config >
Test/Setup >
Error >
Manage Files >
Lock | Unlock
Keysight E36150 Series User's Guide
Description
Configures the current measurement range to high or low
Configures the output sense to 2-wire or 4-wire.
Configures the preferred mode for output on/off transitions.
Configures the protection setting for the output.
Configures the voltage slew rate.
Enables or disables the output coupling or synchronization between multiple output channels.
Configures the inhibit input mode and Digital IO Pin 3.
List is selected by default.
Selects arbitrary waveforms for the output and configures the selected Arb. (Option E36150ADVU)
Runs or stops the Arb.
Inserts a new step to the list.
Deletes a specified step from the list.
Clears all the steps in the list.
Configures the Arb settings.
Runs or stops the data logger.
Configures the knob operation settings. Refer to
Enables or disables the marker.
Configures the data log traces and voltage and current measurement ranges. Also configures the data log
duration, sample period, Min/Max values as well as trigger position.
Auto-scales the traces on the display.
Saves and recalls instrument states.
Displays and configures the I/O parameters for remote operations over the USB, LAN, GPIB, or digital IO
interface.
Accesses the self-test, calibration, and help function as well as configures the user preferences, and sets date
and time.
Displays the instrument's error queue. Errors will be cleared after viewing or instrument reset.
Creates, copies, deletes, and renames files and folders on the USB drive attached to the front panel. Also
allows you to capture the current screen to either a bitmap (*.bmp) or portable network graphics (*.png) file.
Locks and unlocks the display.
Using the knob in data logger view
for more information.
61
Publicité
