Publicité
Les langues disponibles
Les langues disponibles
Turning the Unit On
After you have connected the power cord, press the [On/Standby] key to turn the unit on. The front panel display
lights up after a few seconds. When the front panel meter view appears, use the Voltage and Current knobs to enter
voltage and current values.
Press the [On] key to enable the output.
In meter view, the power supply continuously measures and displays the output voltage and current.
A power-on self-test occurs automatically when you turn the unit on. This assures you that the instrument is
operational. If self-test fails, or if other operating problems occur with your instrument, the front panel error
indicator (!Err) appears at the upper top of the display.
Keysight E36150 Series User's Guide
63
Publicité
