Throttle Tension Adjustment; Idle Speed Adjustment; Motor Cover Fastening Adjustment - Suzuki DF100 Manuel Du Propriétaire

THROTTLE TENSION ADJUSTMENT

The tension of the remote control handle can be
adjusted according to your preference. To
increase the tension, turn the adjuster A clock-
wise. To decrease the tension, turn the adjuster
counterclockwise.
Side mount
type
NOTE:
Top mount type
When adjusting the tension of the remote con-
trol handle, consult your authorized Suzuki
Marine Dealer.

IDLE SPEED ADJUSTMENT

The idle speed has been factory adjusted
between 600 – 650 r/min. in neutral.
(DF140: 675 – 725 r/min)
NOTE:
If idle speed cannot be set within the specified
range, contact your authorized Suzuki Marine
Dealer.
18
MOTOR COVER FASTENING
ADJUSTMENT
If you feel motor cover fastening is loose or too
tight when locking the levers, adjust as follows:
1. Loosen the bolts 1, 2 and 3.
2. Adjust the position of brackets 4, 5 and 6.
To increase the fastening, move the brackets
to the direction A. To decrease the fasten-
ing, move the brackets to the direction B.
3. Tighten the bolts.
Motor cover