Publicité
Les langues disponibles
Les langues disponibles
11 Delay End
12 Self Clean+
13 Smart Control
FlexWash_WV9600M_DC68-03768B-07_EN.indd 47
You can set the washer to finish your wash automatically at a
later time by choosing a delay of between 1 to 24 hours (in 1 hour
increments). The hour displayed indicates the time the wash will
finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press START/PAUSE. The lamp indicator next to the Delay End
button turns on with the clock running.
4. To cancel Delay End, restart the washer by pressing POWER.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this,
you add the Delay End option to the current cycle with a 3-hour
setting, and then press START/PAUSE at 2:00 p.m. The washer
starts operating at 3:00 p.m. and ends at 5:00 p.m. Provided below
is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
Cleans the drum by removing dirt and mold from the drum.
• Perform once every 40 washes.
• Make sure the drum is empty.
After connecting the lower washer to your home network using
the SmartThings app, you can control the washer remotely. When
started, the Smart Control indicator blinks and the front door locks.
The washer enters waiting mode and waits for remote commands.
For more information, visit the SmartThings app page.
3:00 pm
5:00 pm
Start
End
English 47
2019-05-23 PM 2:53:30
Publicité
