Installation
To position without the pipe connector
If you do not use the pipe connector, each drain hose can be positioned in the following
ways:
B
32
English
FlexWash_WV9600M_DC68-03768B-07_EN.indd 32
Over the edge of a wash basin
The drain hose must be placed at a height
of between 24 in. (60 cm) and 35 in.
(90 cm) from the floor. To keep the spout
of the drain hose bent, use the supplied
A
A
plastic hose guide (A). Secure the guide
to the wall using a hook to ensure stable
drainage.
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C)
A
must be no shorter than 18 in. (46 cm)
and no higher or longer than 96 inches
E
(245 cm). Make sure the drain hose and
D
the standpipe are not airtight. The height
of the standpipe (E) must be 43 in. (1100
mm) or higher from the floor.
C
A: Hose guide / D: Tie straps
NOTE
2019-05-23 PM 2:53:27