Publicité
Les langues disponibles
Les langues disponibles
The pipe connector can be positioned in the following ways:
B
B
D
A
B
C
FlexWash_WV9600M_DC68-03768B-07_EN.indd 31
A
A
F
G
E
D
C
F
E
Over the edge of a wash basin
The pipe connector (B) must be placed at
a height of between 24 in. (60 cm) and
35 in. (90 cm) from the floor. To keep
the spout of the drain hose bent, use the
supplied plastic hose guide (A). Secure the
guide to the wall using a hook to ensure
stable drainage.
NOTE
B : Pipe Connector
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C) must
be no shorter than 18 in. (46 cm) and no
higher or longer than 96 inches (245 cm).
Make sure the pipe connector and the
standpipe are not airtight. The height of
the standpipe (E) must be 43 in. (1100
mm) or higher from the floor.
NOTE
A: Hose guide / D: Tie straps / F : Pipe
Connector / G: 85 mm
CAUTION
• Do not extend the (Y-shaped) pipe
connector using an extension hose.
• Make sure you face the tip of the pipe
connector downwards to the drain hole.
Positioning the connector tip elsewhere
can cause the drained water to flow
backward.
Dimensions of the pipe connector
A
172 mm
B
112.5 mm
C
85 mm
D
67 mm
E
Ø 35
F
60 mm
English 31
2019-05-23 PM 2:53:26
Publicité
