Publicité
Les langues disponibles
Les langues disponibles
Operations
06 Spin
07 Soil
08 Pre Soak
09 Steam
10 Extra Rinse
46
English
FlexWash_WV9600M_DC68-03768B-07_EN.indd 46
• High: Underwear, t-shirts, jeans, and sturdy cottons.
• Medium: Jeans, wrinkle-free or wash-and-wear items and
synthetics.
• Low: Delicate items that require a lower spinning speed.
• No Spin: The drum does not spin after the final drain process.
• Rinse Hold (No lamp turns on): The final rinse process is
suspended so that the laundry remains in the water. To unload
the laundry, run a drain or spin process.
NOTE
* Spin Only: This cycle runs a spin cycle only. Press and hold Spin
for 3 seconds. With the cycle time on the display, press Spin
repeatedly until a desired spinning speed is selected. Then, press
START/PAUSE to start the cycle.
Press the button to select the soil level/washing time.
• Heavy: For heavily soiled loads.
• Normal: For moderately soiled loads. This setting is best for
most loads.
• Light: For lightly soiled loads.
This adds 30 minutes of soaking time at the start of the wash
cycle for better stain removal.
With the Steam option selected, the washer senses the weight of
the load and controls the steam effect according to the load size.
This improves washing performance. Cycles available with the
Steam option are: NORMAL, HEAVY DUTY, BEDDING, WHITES, and
SANITIZE.
1. Select a cycle. For applicable cycles, see above.
2. Press Steam.
3. Add detergent and fabric softener as instructed.
4. Press START/PAUSE to start the cycle.
NOTE
Steam may not be visible or present during the cycle, which is
normal.
Adds an additional rinse at the end of the cycle to remove laundry
additives more thoroughly.
2019-05-23 PM 2:53:30
Publicité
