Publicité
5-6. Threading And Feeding Welding Wire
ON
V
OFF
POWER
Turn on power at welding power source.
Pressure
Adjust
JOG
Push wire thru guide up to drive rolls; continue to
hold welding wire. Press power source Jog push
button until drive rolls grab wire. Adjust tension until
wire does not slip. Indicator is for reference only.
OM-223426 Page 16
Tools Needed:
Welding Power Source
PURGE
JOG
Pressure
Adjust
Press Jog push button until wire comes
out of gun. Feed wire to check drive roll
pressure. Adjust knob enough to
prevent slipping.
Hold wire tightly to keep it
from unraveling.
6 in.
(150 mm)
Pull and hold wire; cut off end.
WOOD
Cut off wire. Close cover.
Ref. 804 391-A / Ref. 156 798 / 802 914
Publicité
