Ribimex 042081 Manuel D'instructions Et D'utilisation page 32

Fig.4a
Fig.4d
Check that product and accessories are not damaged.
4.2- Set up and preparation for operation
- Check that the machine is completely and correctly assembled according to local regulations.
- Make sure that no parts are missing. If one (or more) part(s) is (are) missing, do NOT use the splitter.
Contact your local dealer to obtain the missing parts and make sure to correctly assemble them before
using the machine. Failure to do so may result in serious injury.
- Before using the machine, make sure each time that
there are no faulty connections (tears, cuts, etc.)
there are no damage to the machine
all screws are tight
check the hydraulic system for any possible leaks, refill oil if necessary
- Ensure that the working area meets the following conditions:
no danger of slipping
level
free of obstacles
sufficiently well lit
- Do not operate the machine in the direct vicinity of gas or petrol pipes or containers, or any other
easily inflammable materials.
4.2.1- For log splitter 5T PREHLS52 / 042081
Lift the log splitter by the handles at both ends and place it on a 60-75cm high, stable, flat and level
work surface.
Lock the wheels to avoid any slippage or moving.
4.2.1.1- Assembly
a) Support leg
Place log splitter vertically (Fig.5)
Bolt the Support Leg to the Log Splitter (Fig.6).
Fig.4b
Fig.4e
Fig.4c
Page 32 / 64