Publicité
Les langues disponibles
Les langues disponibles
W 610
Max. viscosity:
Power source:
Power consumption:
Atomizing output:
Double insulation:
Sound pressure level:
Oscillation level:
Air hose length:
Weight:
1 Air cup
2 Nozzle
3 Union nut
4 Gun body standard spray attachment 13 Spray gun holder
5 Trigger guard
6 Material volume regulation
7 Handle
8 ON/OFF switch
9 Air hose
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
All coating materials with the red Perfect Spray logo.
Coating Materials Not Suitable for Use
Wall paints without the red Perfect Spray logo.
Alkali and acidic paints. Coating materials with a flash point below 21°C.
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet Download).
1.
Stir the material up and put the required amount into the paint container.
Sprayed material
Glazes
Wood preservatives, mordants, oils, disinfection agents,
plant protective agents
Paints containing solvents and water-soluble paints,
primers, vehicle coating paints, thick-film glazes
Technical Data
110 DIN-s
230 V ~
300 W
75 W
81 dB (A)
< 2.5 m/s²
1.8 m
approx. 1.7 kg
Description (Fig. 1)
Thinning recommendation
10 Carrying belt
11 Air filter
12 Mains lead
14 Container
15 Ventilating hose
16 Valve
17 Stir stick
GB
undiluted
undiluted
dilute by 5 - 10 %
15
Publicité
