Publicité
Les langues disponibles
Les langues disponibles
GB
5)
Place the nozzle (fig. 15, 4) on to the gun body with the recess facing downwards.
Attention: Position of needle must be congruent with the nozzle aperture.
(Fig.16)
6)
Put the air cap (Fig. 17, 3) onto the nozzle (4) and tighten it using the union nut (2).
7)
Position the adjustment ring (fig. 18, 1) on the union nut so that the recesses on the
adjustment ring can snap into both horns on the air cap.
8)
Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
9)
Insert the suction tube with container seal in the gun body.
16. Maintenance
WARNING! Never operate the machine without the air filter; dirt could be sucked
in and interfere with the function of the machine.
Disconnect plug before changing parts.
Change the air filter if it is soiled (Fig. 19, arrow).
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the gun front part (Fig. 20, 7).
17. Spare Parts
Pos.
Name
1
WallPerfect I-Spray spray attachment incl. 1800 ml. container
2
Spray jet adjustment ring
3
Union nut
4
Air cap
5
Nozzle
6
Nozzle seal (2 pcs.)
7
O-ring
8
Ventilating hose, valve cover, diaphragm
9
Container seal
10
Suction tube
11
Container with cover 1800 ml (only for WallPerfect spray
attachment)
12
Handle
13
Air hose
14
Carrying belt
15
Spray gun holder complete
16
Air filter
26
Spare Parts List (Fig. 20)
WallPerfect W 625 I-Spray
Order No.
2326 477
2328 900
2328 903
2328 905
2328 908
2304 433
0417 308
2304 027
2328 919
2328 922
2304 025
2303 300
2303 410
0414 204
0416 220
0414 700
Publicité
