Riello Gulliver RG3D TL Instructions Pour Installation, Utilisation Et Entretien page 70

7. WARNINGS AND SAFETY
The dimension of the boiler's combustion chamber must respond to specific values, in order to guarantee a
combustion with the lowest polluting emissions rate.
You are therefore advised to consult the Technical Assistance Department before choosing this type of
burner for the combination with a boiler. Qualified personnel are those with the professional and technical
requirements indicated by law no. 46 dated March 5, 1990 n° 46.
The commercial organisation has a widespread network of agencies and technical offices whose personnel
participates periodically in instructional and refresher courses at the company training centre.
This burner must only be used for the purposes it has specifically been designed for.
All contractual and other liability on the part of the manufacturer is excluded for injury caused to people,
animals or damage caused to property due to faulty installation, calibration, adjustment, maintenance or
improper use.
7.1 BURNER IDENTIFICATION
The Identification Plate on the product gives the serial number, model and main technical and performance
data. If the Identification Plate is tampered with, removed or missing, the product cannot be clearly identi-
fied thus making any installation or maintenance work potentially dangerous.
7.2 BASIC SAFETY MEASURES
➤ Children or inexpert persons must not use the appliance.
➤ Under no circumstances must the intake grids, dissipation grids and ventilation vents in the installation
room be covered up with cloths, paper or any other material.
➤ Unauthorised persons must not attempt to repair the appliance.
➤ It is dangerous to pull or twist the electric leads.
➤ Cleaning operations must not be performed if the appliance is not disconnected from the main power supply.
➤ Do not clean the burner or its parts with inflammable substances (e.g. petrol, alcohol, etc.).
The cover must be cleaned with soapy water.
Do not place anything on the burner.
➤
Do not block or reduce the size of the ventilation vents in the installation room.
➤
Do not leave containers and inflammable products in the installation room.
➤
3363
17 GB