ProKlima XKYRd-45 Mode D'emploi page 39

9. Ventilation
1) Press the mode button to select the ventilation mode.
2) Press the wind speed button to select the low / mid / high wind speed in 3 levels.
3) Press the swing button to turn on/off the swing function.
Note:
• It displays the room temperature during ventilation.
10. Timing (To set the timer for cooling, strong cooling, dehumidification, heating or ventilation mode.)
- Set the end time when the appliance is running under cooling, strong cooling, dehumidification,
heating or ventilation mode:
1) Press the timer button.
2) Press the button "+" or "-" to set the end time.
3) Press the timer button again for confirmation.
- Set the start time and end time when the appliance is just powered on, not running under cooling,
strong cooling, dehumidification, heating or ventilation mode:
1) Press the power button to turn on the appliance and then press the timer button.
2) Press the mode button to select your desired mode: cooling, strong cooling, dehumidification,
heating or ventilation.
3) Press the timer button for confirmation.
4) Press the button "+" or "-" to set the start time and then press the timer button for confirmation.
5) Press the button "+" or "-" to set the end time and then press the timer button for confirmation.
For example:
We set the start time "1" and end time "2" at 9 a.m.
The appliance will then start at 10 a.m. and stop at 12 a.m.
Note:
• Once the timer is set, the mode cannot be changed. If you want to change the mode, please press the
power button to turn off and restart.
11. Preset (To set the timer for cold storage or heat storage.)
- Preset setting:
1) Press the preset button to enter the preset mode, and then select the cold storage preset or heat
storage preset.
2) Press the button "+" or "-" to select within how many hours to finish the cold storage or heat
storage, (time range: 4-24 hours). After selecting the time, press the preset button again for
confirmation.
- Preset cancellation method:
1) Press the preset button again, the previous preset will be cancelled, and a new preset can be
made at this time.
2) After the power is off, the preset will be cancelled automatically.
3) Press and hold the preset button for more than 3 seconds to cancel the preset.
Note:

Once the cold storage or heat storage is finished, the unit will automatically enter the standby state.
Press the mode button to choose cooling or heating function then.

Other operations cannot be carried out after the preset is set. If users need to do other operations,
please cancel the preset first.
- 38 -