3.5
damper operation
To close the fl ue damper, pull the damper control rod down and
push it to the right.
To open the damper, pull down slightly and push the damper con-
trol rod to the left side and release.
note:
The damper must be in the "open" position when burning.
note:
If the damper becomes unthreaded, it will remain in the "open" position.
note:
If the damper does not operate properly, do not start a fi re.
operation
OPEN
CLOSED
OPEN
OPEN
CLOSED
CLOSED
W415-1697 / A / 08.27.18
EN
13