operation
EN
3.4
door & screen operation
WARNING
!
•
Use only a non-combustible material to fi nish the face of the appliance. A non-combustible material such
as cement board is required for this purpose.
•
Ventilation openings are recommended for all enclosures.
•
Above 73 3/8" (186.4cm) combustible fi nishing materials may be used on the front face.
•
Do not insulate around the appliance.
Insert handle into screen and glass door receiver bottom left corner to raise and lower the door. When not in use,
hang the handle on the tool set.
To swing open the glass door, lift the latch on the right side up and swing the door outward.
note:
If the doors do not open or close smoothly and remain as positioned, see the "balance weight adjustment"
section in the Installation Manual.
12
W415-1697/ A / 08.27.18
TETHER
note:
To prevent the rapid rise of the doors, it is
recommended to secure the cable on the top
of the door frame when removing the door or
screen frames.