Proline EXP1050 Manuel D'utilisation page 68

discard the remaining water. Wash the water tank with soapy
water, rinse it well and wipe it dry.
• Wipe the exterior of the appliance with a slightly damp cloth. Do
not use metal scouring pads or abrasive cleaners.
• Dry and replace disassembled parts.
DESCALING
After regular use, hard water can cause mineral build up in the
appliance, which will affect the operation of the appliance, the
brewing flow, brewing temperature, and the taste of the espresso.
The frequency of descaling depends on the hardness of the water
used.
It is recommended to descale your appliance every 60 or 90 days.
1. Fill the water tank with a solution of cold water and descaler
according to the instructions on the package.
2. Attach empty filter and filter holder.
3. Place a large container under both the brew head and the steam
tube.
4. Plug in the appliance. Ensure that the steam knob is set at the
OFF position.
5. Press the ON/OFF button
this button to stop flashing.
6. Press the manual button
and descaler run through the brew head. Press
the flow.
7. Wait for the ON/OFF indicator light to stop flashing and press
the steam button
8. Turn the steam knob anticlockwise towards the maximum
position to allow the remaining solution to run through the
steam tube to clean any residue left in the tube from the milk
steaming process. Then turn the steam knob clockwise to the
OFF position.
66
EXP1050 IB 2022.indd 66
and wait for the indicator light on
and let half the solution of water
.
again to stop
28/2/2022 9:09 AM