Proline EXP1050 Manuel D'utilisation page 61

10. Before removing the filter holder, allow the appliance to cool for at least 5
minutes.
11. Turn the filter holder handle to the left to remove the filter holder.
12. Discard used espresso grounds. Allow the filter holder and filter to cool
thoroughly before touching.
13. Wash both the filter holder and filter with a soft cloth or brush in warm
soapy water. Rinse them well.
OVERHEATING AND OVERPRESSURE PROTECTION
Your appliance has a double safety system to protect the appliance from
overheating and overpressure.
• In case that the appliance has overheated, it will stop working. Unplug it and
let it cool before using it again.
• The appliance is equipped with a safety valve. The safety valve will release
the steam pressure from the boiler if the pressure switch fails to cut off the
element.
EXP1050 IB 2022.indd 59
59
28/2/2022 9:09 AM