Proline EXP1050 Manuel D'utilisation page 56

BEFORE USING FOR THE FIRST TIME
Carefully unpack the appliance and remove all packaging materials.
Before using your espresso maker for the first time, clean all removable parts in
warm soapy water , and rinse well before replacing.
Before brewing your first cup of espresso, please clean your espresso maker as
follows:
1. Place the appliance on dry, flat and heat-resistant surface.
2. Fill the water tank with fresh cold water to the MAX level line.
Open the water tank cover. Grasp the water
tank handle and lift the water tank out of the
appliance.
3. Replace the water tank to its original position. Close the water tank cover.
Press the
handle to make
sure the water
tank is in place.
54
EXP1050 IB 2022.indd 54
You can open the water tank cover and
pour water into the tank.
OK
Fill the water tank up to the MAX level line.
IMPORTANT: It is normal that there may
be some water in the area under the water
tank. Please regularly dry this area using a
clean sponge.
28/2/2022 9:09 AM