Proline EXP1050 Manuel D'utilisation page 60

You can also change the brewing time up to about 44s.
a. Press and hold
•
b. When the desired brewing time is reached, press
the setting.
c. Wait for the ON/OFF indicator light to stop flashing and then press
to start brewing. When the set brewing time has elapsed, the appliance
will stop the brewing cycle.
d. To cancel the brewing time setting, unplug the appliance and wait for a
while before plugging in.
• To brew a double shot, press
the cup or cups. After about 40s, the appliance will automatically stop
working.
You can also change the brewing time up to about 84s.
a. Press and hold
•
b. When the desired brewing time is reached, press
confirm the setting.
c. Wait for the ON/OFF indicator light to stop flashing and then press
appliance will stop the brewing cycle.
d. To cancel the brewing time setting, unplug the appliance and wait for a
while before plugging in.
• To customize the brewing to your preference, press
begin to flow into the cup or cups.
When the desired amount of coffee has been brewed, press
to stop the brewing process.
AUTOMATIC SHUT OFF
In order to save energy, the appliance will automatically turn off when it has not
been used for about 30 minutes.
58
EXP1050 IB 2022.indd 58
for about 3 seconds.
The indicator light on the button will illuminate and the pump
starts timing your shots. Then the indicator light will flash.
for about 3 seconds.
The indicator light on the button will illuminate and the pump
starts timing your shots. Then the indicator light will flash.
to start brewing. When the set brewing time has elapsed, the
again to confirm
. Espresso will begin to flow into
. Espresso will
again to
again
28/2/2022 9:09 AM