Proline EXP1050 Manuel D'utilisation page 57

4. Place an empty (do not add coffee) double shot filter into the filter holder.
5. Insert and lock the filter holder into the appliance following the detailed
instructions in the chapter: Brewing Espresso.
6. Place a container under the 2-spout brew head.
7. Plug in the appliance.
8. Press the ON/OFF button
• The indicator light on this button will flash.
• For the first use, the water may not come out.
You may turn the steam knob anticlockwise to the maximum position.
When the indicator light on the ON/OFF button stops flashing,
press the manual button
When the steam tube dispenses water, press
stop dispensing water.
Turn the steam knob clockwise to the OFF position.
9. Wait for the indicator light on the ON/OFF button stops flashing, and then
press
• The water will begin to flow into the container.
10. When the container is full, press
11. Empty the container and the water collected in the drip tray.
12. Repeat this process to brew 2 or 3 containers of water.
• You are now ready to brew espresso.
EXP1050 IB 2022.indd 55
.
.
.
again to
OFF
to stop the flow of water to the container.
55
28/2/2022 9:09 AM