Publicité
Machine Set-up Guide
!
Fitting the Brush / Pad / Turn on water
550mm Brush or a 500mm Pad on the TGB 6055.
Featuring the Nulock brush system.
The brush is simply pushed and twisted to lock, making fitting and removal a simple process.
Slide the brush / pad under the brush deck.
Fit the brush / pad onto the Nulock drive chuck, twist to lock the brush / pad in place.
Safety gloves are recommended for the changing of used brushes.
Turn on the clean water tap.
Fitting the Floor Tool
The floor tool has been designed for quick fitting, allowing easy squeegee blade replacement and a safety knock-off feature if the
floor tool gets snagged, whilst in transit.
NOTE: It is easier to fit the floor tool if the weight of the machine is resting on the brush. Ensure the brush is fitted first.
Fit the floor tool and retain using the
detent pin.
Push waste collection pipe onto the
floor tool, ensure a tight fit.
Raise the floor tool for transit or
lower for cleaning operation, using
the lifting handle fitted to the back
of the machine.
For fitting the floor tool blades
(See Page 21).
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF
BEFORE MAKING ANY ADJUSTMENTS
!
9
T 01460 68600
Publicité
