Télécharger Imprimer la page

Stiga CS 24 Li Manuel D'utilisation page 16

Masquer les pouces Voir aussi pour CS 24 Li:

Publicité

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference
INDEX
1.  GENERAL INFORMATION .......................... 1
2.  SAFETY REGULATIONS ............................. 2
3.  GETTING TO KNOW THE MACHINE ......... 6
  3.1  Description of the machine and planned 
use ........................................................ 6
  3.2  Safety signs .......................................... 6
  3.3  Identification label ................................ 7
  3.4  Main components ................................. 7
4.  ASSEMBLY .................................................. 7
  4.1  Assembly components ......................... 7
  4.2  Assembly of the guide bar and toothed 
chain ..................................................... 8
5.  CONTROLS ................................................. 8
  5.1  throttle control lever .............................. 8
  5.2  Throttle brake button ............................ 8
6.  USING THE MACHINE ................................ 8
6.1 Preparation ........................................... 8
  6.2  Safety checks ....................................... 9
  6.3  Startup .................................................. 9
6.4 Operation .............................................. 9
6.5 Stop .....................................................11
6.6 After operation .....................................11
7.  ROUTINE MAINTENANCE ........................ 12
  7.1  General information ............................ 12
  7.2  Battery ................................................ 12
  7.3  Topping up the chain oil tank .............. 12
  7.4  Cleaning ............................................. 13
  7.5  Chain catcher ..................................... 13
7.6 Nuts and bolts .................................... 13
8.  EXTRAORDINARY MAINTENANCE ......... 13
  8.1  Machine and bar lubrication holes  .... 13
  8.2  Chain drive sprocket ........................... 13
  8.3  Maintenance of the toothed chain ...... 13
  8.4  Guide bar maintenance .......................14
9.  STORING THE MACHINE ..........................14
  9.1  Storing the machine ............................14
  9.2  Storing the battery ...............................14
10.  H ANDLING AND TRANSPORTATION .......14
11. ASSISTANCE AND REPAIRS .................... 15
12.  W ARRANTY COVERAGE ......................... 15
13.  M AINTENANCE TABLE ............................. 15
14.  C HAIN MAINTENANCE TABLE ................. 16
15.  P ROBLEM IDENTIFICATION..................... 16
16.  A TTACHMENTS ON REQUEST .................17
16.1 batteries ...............................................17
  16.2 Battery charger ....................................17
1. GENERAL INFORMATION
1.1
HOW TO READ THE MANUAL
Some paragraphs in the manual contain 
important information regarding safety and 
operation and are emphasized in this manner:
NOTE or IMPORTANT these give details
or further information on what has already been
said, and aim to prevent damage to the machine.
The
 symbol highlights danger. 
Non-compliance with the warning 
could lead to personal and/or third 
party injury and or damage.
The paragraphs highlighted in a square
with grey spots indicate the optional 
characteristics not on all models 
documented in this manual. Check if 
the characteristic is on this model.
Whenever reference is made to a 
position on the machine "front", "back", 
"left" or "right" hand side, this refers to 
the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for 
use are numbered 1, 2, 3, etc.
Components shown in the figures 
are marked A, B, C, etc.
A reference to component C in figure 2 is 
written: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The 
actual parts may vary from those shown.
1.2.2 Titles
The manual is divided into chapters and 
paragraphs. The title of paragraph "2.1 
Training" is a sub-title of "2. Safety regulations". 
References to titles or paragraphs are marked 
with the abbreviation chap. or par. and the 
relevant number. Example: "chap. 2" o "par. 2.1".
EN - 1

Publicité

loading