DCS-5000
•
Properly filed cutters are shown in
illustration.
•
When setting of the chain is
finished, soak it in oil and wash
away filings completely before
using.
•
When chain has been filed on the
bar, supply sufficient oil to it, move
the chain slowly to wash away the
filings before using again.
•
If the chainsaw is operated with
filings clogged in the groove, the
saw chain and the guide bar will be
damaged prematurely.
•
If the saw chain becomes soiled
with resin, for instance, clean it with
kerosene and soak in it oil.
To sharpen other chains, follow chain manufacturer's instructions.
99922238004
© 01/2023 ECHO Incorporated
MAINTENANCE
30°
Top plate
filing angle
0.64 mm (0.025 in.)
Parallel
Depth gauge
60°
Side plate angle
37