Trouble Shooting - Zipper Maschinen ZI-ABH1500D Manuel D'utilisation

14

TROUBLE SHOOTING

Disconnect the machine from the power supply prior to any checks performed at the ma-
chine itself!
Trouble
Machine stops or will not start
Impact system blocks
Drill stucks
MANY MALFUNCTIONS AND DEFECTS CAN BE AVOIDED BY LETTING THE MACHINE BE
CONNECTED TO YOUR POWER SUPPLY BY A CERTIFIED ELECTRICIAN
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.
ZIPPER MASCHINEN GmbH
ZI-ABH1500D / ZI-ABH1700D
! Machine unplugged
! Cord damaged
! Overload tripped
High fat friction due to low
!
temperatures
! Moving parts are blocked
! Disruptive reinforced steel
www.Zipper-Maschinen.at
Possible cause
N O T I C E
Solution
! Check all power connections
! Change cable
Allow motor to cool and reset
!
by pushing off switch
Warm up the machine in a
!
warm environment
! Change damaged parts
! Fix new hole
32