EUROM PD2101 XXL Manuel D'utilisation page 15

Step 3: Pull the inner (telescopic) tube out of the outer tube and secure
it by tightening the black coupling nut.
Step 4: Lead the female plug of the mains
lead through the base and the bottom,
centre and top tube.
Step 5: Connect the female plug to the plug connector of the
heating cap. Secure this connector using the clamp included in the
package. Make sure that the arrow of the clamp is directed
towards the top of the patio heater.
Step 6: Put the heating cap on the top tube and secure it
in its place using the screws included in the package.
15