Steinberg Systems SBS-TW-5S Manuel D'utilisation page 16

3.3.3. DISPLAYED MESSAGES:
"O_Ld": overloaded
"LO": batteries low
"Err": error during calibration
"Pass": calibration successful
3.3.4. FUNCTION KEYS
TARE - Tare. With this function you can weigh the contents of the container:
1. Place the container on the scale.
2. Press TARE button. The display should show "0".
3. Add the contents to be weighed to the container.
UNIT - change weighing unit (press button to change unit from kg to pounds,
ounces and vice versa).
3.3.5. CALIBRATION:
1. Hold down the "UNIT" button for 6 seconds until the display shows "CAL" and
"200g".
2. Press the "TARE" button to select a calibration value from 200/500 g, 1/2/5 kg.
3. Press "UNIT" to confirm the selection.
4. Place an object of the selected weight on the scale.
5. After 2-3 seconds, the display will show "PASS", indicating that the calibration
has
The "Err" message indicates an error during calibration. In this case, turn the scale
off and on again, and then attempt the calibration again.
been successfully completed.