Publicité
Les langues disponibles
Les langues disponibles
Lubricating oils to be used: Generally SAE 5 W to SAE 10
For gearless impact wrenches and small grinders, only SAE 5 W
For damp compressed air, oils are to be used that take up water (without losing the lubricating
effect) and that contain anticorrosive additives. At lower temperatures (especially for work outside)
it may be necessary to use an antifreeze lubricant (e.g., kilfrost, BP Energol AX 10, Kompranol N
74).
For saw-chain lubrication on chain saws: Machine oil with adhesive additive, viscosity c
ST 49-55' (6.5 – 7.5E) / 50ºC
Greases (free of resins and
acids)
Designation in accordance
with DIN 51502
Consistency class (DIN
51818)
Saponification type
Dripping point
Worked penetration
Temperature range
Multi-purpose greases
for antifriction and friction
bearings and gears
KL 2 K
2
lithium
185ºC
265 to 295
-25ºC to 125 ºC
Special greases for high-
speed miter gears
G 00h
00
sodium
145ºC
400 to 410
-25ºC to 100ºC
27
Publicité
