Publicité
Les langues disponibles
Les langues disponibles
Ensure that you maintain a good footing and proper balance at all times.
Protect your eyes and ears, head and hair, hands and feet.
Never work under the influence of alcohol, drugs or stronger medication.
Follow the general current and appropriate Accident Prevention and Safety Procedures.
Switch off the machine before laying aside.
Keep your working area clean and uncluttered. Maintain a proper footing and balance at all
time. Never work with the machine while standing on a ladder or leaning against a scaffold.
Do not use this machine in any different way than as directed by these operating instructions.
Hold the machine tight during operation. When operating with the hammer drill also use the
second handle.
Regular maintenance is essential - check all screws, fittings etc. for tightness.
Check air hose for damage.
Make sure the unit is lubricated.
Never use dull tools or drills.
Avoid sparks in hazardous environment - created by the drill. Always flush material and drill
for cooling with sufficient water.
Always disconnect machine from the air line for changing drills or working on the machine.
Remove rings, watches, ties etc. that could be torn by the machine.
ATTENTION! Never use the flexible hose as a lifting handle!
Your safety is in your hands.
Keep these instructions
Intended Use
The performance/ output power of this machine is designed for drilling of different work
pieces and materials. The machine must be held tight against rotation. Make use of the second
handle during hammer drilling.
Any use, deviating from the above is not an intended use.
USE
23
Publicité
