Publicité
Les langues disponibles
Les langues disponibles
USA/CA
USA
4 Installation and Setup
4.1 Setup
The cabinet should be transported in its original package to avoid any risk of
deterioration or damage.
If you transport the wine cabinet laying down, it must be protected and laid on the
side where the compressor's loading nozzle is facing downward. Before connecting
the appliance, please let the appliance stand upright for 24 hours.
If you are trying to stand the wine cabinet up from the rear, lay it on its left side first.
This wine cabinet should not be recessed, nor should it be placed in an enclosed
cabinet. It is designed for free-standing installation only.
Remove the plastic protecting the screen.
During the setup process of the wine cabinet as well as after an electrical power
outage, the control system is set by a calibration process. During this process, the
display and the selection buttons are lit and the alert pictogram (triangle with
exclamation point) blinks.
The process can take from 10 to 60 seconds. When the process is finished, the
display and buttons return to normal.
The temperature inside the wine cabinet is automatically controlled by the electronic
control system (Figure 1).
7
Publicité
