Publicité
Les langues disponibles
Les langues disponibles
USA/CA
4.2.3
Sliding shelves
1- Prepare your sliding rails in the right
direction for installation:
-
The part with stems facing upward has
to slide outward from the wine cabinet.
-
The other part, with stems facing
downward, has to be inserted into holes
provided for that purpose in the lateral
walls of the cabinet.
Please note that biased stems facing
downward (1) have to be positioned in the
holes at the back of the appliance. They are
biased in order to keep the shelf straight
and prevent tilting.
2- Installation of the right rail:
-
Position your rail at the desired height.
-
Insert the biased stem into the hole at
the back of the appliance (2).
-
Then insert the second stem, at the
same height as the other, into the hole
at the front of the appliance (3).
-
Be sure that the rail is level, fixed and
doesn't tilt (4).
3- Installation of the left rail:
-
Position your rail at the same height as
the right rail.
-
Insert the biased stem into the hole at
the back of the appliance.
-
Then insert the second stem, at the
same height as the other, into the hole
at the front of the appliance.
-
Be sure that the rail is level, fixed and
doesn't tilt.
4- Installation of the shelf on the rail:
-
Pull both rails, sliding them outward
from the wine cellar (5).
-
Position the shelf in such a way that
the 4 stems facing upward are inside
the holes provided for that purpose on
the shelf.
9
USA
Publicité
