Avintage DIVA Classic 180 Manuel D'utilisation page 16

USA/CA
6.3.2 Accessing the temperature setting mode
From the factory, all models are preset for Fahrenheit. To change the value between
F and °C, simply press the "
If a new setting or an adaptation of the preservation temperature is considered to be
necessary:

Press the SET key "

The possible settings are:
o
temperature setting
o
winter system temperature setting
o
high temperature alarm setting.

The different settings will be automatically displayed after a few seconds in
a sequential mode, or you can select one by pressing the SET key "
the desired function is displayed.

Press the UP and DOWN keys "
requested, and press the SET key "
seconds and you will be back into the main menu. When the setting is selected,
the temperature is in a blinking mode, and then you can adjust it.
Temperature decrease

Press the DOWN key "

Validate your selection by pressing the SET key "
Temperature increase

Press the UP key "

Validate your selection by pressing the SET key "
6.4 Temperature alarm
Your wine cabinet has a high temperature alarm, which is already preset at 86F
(30°C). We recommend you do not change the setting.
" arrow for more than 3 seconds.
" for 3 seconds to enter into the main menu.
" to validate your choice, or wait a few
" to decrease the temperature degree by degree.
" to increase the temperature degree by degree.
15
" to select the temperature
".
".
USA
" until