Publicité
Les langues disponibles
Les langues disponibles
USA/CA
slight pressure is necessary to put the angle iron in place and make sure that it
holds properly).
Always start loading the wine cabinet from the lower level.
Then simply stack the bottles with their bases facing backward in the back row
and conversely for the front row. The wine bottle shelves are to be arranged
according to the size of your wine cabinet and the shapes of your wine bottles.
IMPORTANT: MAKE SURE THAT THE BOTTLES DO NOT COME IN CONTACT
WITH THE INNER CABINET'S BACK WALL.
If you have a large number of bottles, we recommend that you load 40 bottles at a
time and then let the device run for 12 hours before you load another 40 bottles.
Repeat this operation as many times as necessary in order to create a thermal mass
in your wine cellar.
Additional storage shelves are available for purchase from the after-sales service
department of your retailer or online at www.frenchcornercellars.com.
7.3.1
Shelves' maximum load
The limit load per shelf must comply with the maximum indicated:
Maximum loading values of fixed wine bottle shelves: 150lbs/68 kg (approximately
52 bottles, 4 levels of 75 cl bottles by shelf maximum). Sliding wine bottle shelves: 55
lbs/25 kg (approximately 15 bottles).
Do not exceed the designated maximum capacity. (Warning: Do not obstruct the
activated charcoal filter.)
The wine bottle shelves are to be arranged according to the size of your wine cellar
and the shapes of your wine bottles.
You can also load bottles into the cabinet without any shelf.
22
USA
Publicité
