Totalizing - Sartorius M-prove AY303 Mode D'emploi

Totalizing

Purpose
With this application program you can add up successive weight values exerding capacity
of balance.
Example: Totalizing weight values
Step
1. Select application program
2. Select Totalizing
3. Confirm setting
Symbol " " on the display: application is active
4. If necessary: zero the balance
5. Place sample on balance
(in this example, 380 g)
6. Store value in memory.
Total weight is displayed
steadily; symbol flashes.
7. Remove sample from balance
8. Place the next sample on the balance
(in this example, 575 g)
9. Store value in memory. Totalized stored
weight is displayed; symbol
Note: symbol remains on indicating
stored value in memory until cleared
10. To view the current weight for 2 seconds
(if a printer is connected, a printout is generated)
11. Clear totalizing memory
(if a printer is connected, total is printed)
12. End Totalizing
13. Reactivate Totalizing (if no other
application program has been selected)
(if a printer is connected, total is printed).
14. Repeat procedure starting from Step 6.
14
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Key (or instruction)
(Zero) > 2 sec
(F) repeatedly
(Enter)
(Zero)
(Enter)
(Enter)
flashes.
(F)
(F) > 2 sec
(Enter) > 2 sec
(F)
Display