Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE (continued)
REPLACING THE LED LIGHT BULBS (
CAUTION: LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the one
already used. Make sure all the control switches are off and the hood is unplugged or that the breaker is OFF.
STEPS
:
• This range hood uses LED light fixture: 3W Max 12V LED
• Make sure the range hood is unplugged or turn OFF the breaker. Make sure the lights are cool to touch.
• Placea flat‐headscrewdriver between the light housing and the hood body, gently pry up the light housing and search
for the metal clip.
• Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard the
used light fixture.
• Reverse the steps to install a new LED light fixture. Turn the breaker or hood ON to test for operation.
SERVICE AND WARRANTY
We warrant our hood against defects in materials and workmanship under ordinary residential use for one (1) full
year from the date of original retail purchase. This limited warranty applies to any repair and /or replacement parts.
This limited warranty is not subject to improper installation, accident, misuse, neglect, fire or other external causes,
alterations, repair or commercial use.
You can contact our After Sales/Service Department from: Monday through Friday, 8h30 to 16h30
Tel: 450.963.1303
Toll free: 1.888.651.2534
Fax: 450.963.1416
Web/E‐mail:
www.agiservice.ca
CONTINUED)
/
customer
agintl.qc.ca
@
31
(Eastern STD Time)
Publicité
