Technaxx TX-145 Mode D'emploi page 56

Voice prompt
Device volume
Motion
detection
management
Time
Recording
management
- Enable/Disable the prompt tone of the device.
- Change the language according to user's needs. Voice
Prompt is mainly used for WiFi configuration of the device
and status information for the user.
- Device recording: volume of the recorded video files
- Device output sound: volume the device speaker
playback the sound
- Motion detection: Enable/disable motion detection
alarm. When the alarm function (motion detection) of the
camera is triggered, the device will push the alarm
message to our server and then the server will push the
message to your Smartphone which bind push service and
receive alarm push.
- Motion detection tracking: Enable/disable the tracking
option. The camera will follow the moving object
automatically. (not available for this model)
- Motion detection recording: Detection of a moving
object in the image, the camera will record the video and
save it to MicroSD card.
- Motion detection alarm/notifications: Enable/disable
this function to get push notifications from the TX-145 with
every detected motion.
- Motion detection sensitivity: Select the sensitivity of the
motion detection. Depending on the circumstances, a
different attitude may be the best.
- Motion detection tips/alarm siren: Enable/disable to
here a siren sound from the TX-145 with every detected
motion. After you enabled the function you can choose to
use the default sound or customize the alarm by recording
your own sound.
- Time video: Enable/disable continuous recording. Note:
Recording schedule needs to be configured.
- Recording schedule: Record the continuous video
according to recording time schedule set up by user.
19