Technaxx TX-145 Mode D'emploi page 40

1. Features
⚫ Use as additional camera for TX-128 or stand-alone camera
⚫ Viewing angle 90° horizontal & 55° vertical
⚫ FullHD video resolution 1920 x 1080 with max. 15fps
⚫ Brilliant 1/ 2.9" CMOS colour sensor (2MP)
⚫ Motion detection up to ~8m (PIR 120°)
⚫3 IR LED up to ~15m for optimal night vision
⚫ Rapid installation, only via Android & iOS APP
⚫ Free "Security Premium" APP for worldwide access [available on
Google Play & APP Store]
⚫ Water and dust resistant IP66
⚫ Alarm function (push message) on your Smartphone
⚫ Built-in microphone & speaker for 2-way communication
⚫ Supports MicroSD(HC/XC) cards up to 128GB
⚫ H.264/H.265 video compression (for space-saving recordings of
high quality)
⚫ Supports 2.4GHz wireless network (WiFi / IEEE 802.11/b/g/n) up
to 30m
2. Product overview
IR LED:
The device activates the infrared light automatically as soon as low
illumination prevails.
MicroSD card slot:
To insert the MicroSD unscrew both screws on the bottom of the camera. Be
careful the loudspeaker is connected to the cover. Open the cover carefully to
not lose the screws. Support MicroSD card for local storage (max. 128GB). To
guarantee the normal use of MicroSD card, before insert the MicroSD card,
make sure its file system is FAT32 and there is more than 256MB space
available. When you use a size 64-128GB MicroSD card. Format the MicroSD
card after inserting and configuration via the App. To work properly, the App
must show the following status under device memory: Normal.
RESET Button:
Press the reset button for 5 seconds to reset the device. You will hear a voice.
3