Technaxx TX-145 Mode D'emploi page 52

Adding by local device IP: You can find the IP address in the router menu or
in the Security Premium PC Software. Fill in port (standard is 80) a device
name, username and password for the camera. The password was
customized by you while WiFi configuration. The standard username is
admin. Click on complete to save the settings.
Note: Adding the device by DDNS it is possible to access the TX-145 from
outside your local network (via mobile network 3G/4G/LTE).
Adding by DDNS: Enter your DDNS domain or the static IP of the router. You
maybe need to set a port forwarding for the IP of the TX-145 in your WiFi
router. There for check the manual of your router. Fill in the device name,
username and password for the camera.
The password was customized by you while WiFi configuration. The
standard username is admin. Click on complete to save the settings.
Note: Using DDNS function you need to:
→ Register to a third party provider (e.g. DynDNS, No-IP, etc.) that provides
you a DDNS domain OR → your router has a static IP from your internet
provider.
15