Publicité
Les langues disponibles
Les langues disponibles
GB
ENGLISH
TECHNICAL DATA
Cordless lawn mower
Battery voltage
Battery capacity
Speed
Cutting diameter
Type of protection
Weight
Noise details
Measured according to
Sound pressure level L
Guaranteed sound power level L
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 60335,
Uncertainty K = 1,5 m/s
Vibration emission value a
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SYMBOLS
DANGER!
Non-observance will result in the risk of serious injury or
death to oneself or others.
WARNING
Non-observance will result in the risk of injury to oneself
or others.
CAUTION
Non-observance will result in the risk of injury to oneself
or others.
20
EN 60335; Uncertainty K = 3 dB (A)
1)
1)
pA
2)
WA
2
h
GM ARM 4043
40 V
2,5 Ah
(2x2,5 Ah)
3100 rpm
430 mm
IP X1
20,4 kg
2000/14/ EG
2)
79,3 dB (A)
96 dB (A)
1,22 m/s
NOTE
These give details or further information on what has
already been said, in the aim to prevent damage to the
machine.
Warning/caution!
Read the Operating Instructions!
Save all warnings and instructions for future
reference.
Wear eye protective goggles !
Wear ear protectors!
Wear safety cut through resistant shoes with
safety sole and steel toe !
GM ARM 4046 S
40 V
2,5 Ah
(2x2,5 Ah)
3100 rpm
460 mm
IP X1
24,4 kg
80,9 dB (A)
96 dB (A)
2,34 m/s
2
2
Publicité
