Connection Diagram - Sygonix SY-3396992 Notice D'emploi

b) Connection diagram
The indoor unit (A) and the outdoor unit (B) are connected via a two-core cable as shown above. Power is supplied
via the included power adapter (C).
A door opener (D) can be connected directly since the outdoor unit provides the operating voltage directly.
The outdoor unit has another connection for a second door opener, for example, for an entrance gate (E) to a property.
It is potential-free, so you need to provide the operating voltage with an external power adapter (F).
Always observe the contact rating; see chapter "Technical data".
Never switch the mains voltage via the connection terminals of the outdoor unit! There is a risk of fatal
electric shock!
28
Cable length (outdoor unit <> indoor unit) ≤100 m
Cross section 0.75 mm² with cable length <50 m
Cross section 1.0 mm² with cable length 50 - 100 m