Publicité
Les langues disponibles
Les langues disponibles
EN
Using the Smart Scale
Note:
• Turning on Zero-Current Mode in the VeSync app will turn off the scale's
electrical current and will only provide measurements for weight and
BMI. This mode can be helpful for users who are pregnant or who have
implanted medical devices, such as pacemakers.
• To measure your baby or pet, turn on Baby Mode and follow the in-
app instructions for weighing. Baby Mode will not measure other body
metrics and will only measure weight and BMI.
1.
Place the scale on a hard, flat surface.
Note:
• Placing on soft surfaces such as a shaggy carpet may cause
inaccurate measurements or tipping. If necessary, the scale can be
used on low-pile carpet with a fiber length of 10 mm / 0.4 inches or
less.
2.
Step on the scale, then step off. Wait for the LED screen to
display "
3.
Place dry, bare feet on the scale's conductive areas. While
you stand on the scale, you will see a " " moving across the
screen, which is measuring body impedance values to calculate
body composition. Please stay on the scale during this part until
the screen re-displays your weight. If your scale is connected to
the VeSync app, additional results (such as BMI, body fat, etc.)
will be shown in the app.
" before using.
21
Publicité
