HQ Power HQPL11001 Mode D'emploi page 5

4.
5.
4.3 Testing
When each lamp holder has a lamp fitted and the gaskets are
correctly placed, test the chain before installing it.
1.
2.
If the problem persists, do not use the chain and contact your
dealer.
V. 02 – 18/10/2021
HQPL11001/HQPL11002/HQPL11003
With the gasket folded down, screw the lamp into the lamp
holder.
Fold the gasket back up around the base of the lamp. Make
sure that the gasket fits evenly. The gasket must not be
crinkled.
OK
Plug the chain into a suitable power socket.
Check if all lamps are working.
If yes, you can proceed with the installation.
o
If no, disconnect the chain from power and replace
o
any faulty lamps.
5
Not OK
©Velleman Group nv