Rear View Mirror; Crutch Holder; Lights And Indicators; Swing Away Tray - Quickie Salsa M2 Mini Manuel D'utilisation

4.26 Rear view mirror

WARNING!
To avoid injury to people around you please be aware
that the mirror protrudes outside the space envelope of
the wheelchair and could cause injury to someone when
driving past.
The mirror must be used on the 10KPH model on UK
roads.
Always make sure that when using the mirror that it
is clean and unbroken so that it does not impair your
visibility.

4.27 Crutch holder

WARNING!
• Make sure that the crutch is securely fastened to the
crutch holder.
• Make sure that the crutch is not interfering with the
mechanisms of the wheelchair.
• Make sure that the crutch does not protrude from the
wheelchair.
• Do not attempt to remove the crutch whilst the
wheelchair is in motion.
• Always come to a complete stop and turn off the
power to the controls before attempting to remove
the crutch. This will avoid accidentally operating the
wheelchair.

4.28 Lights and indicators

WARNING!
Ensure that the lights and indicators are functioning
correctly and lenses are clean before going outdoors at
night.

4.29 Swing away tray

WARNING!
• The maximum weight allowed for the tray is 2.5kg.
• Do not overload the tray, this could cause the tray
to break or could cause the wheelchair to become
unstable.
• Do not leave lit cigarettes or other heat sources on the
tray as this could cause the tray to deform and mark.
• Ensure that all extremities and clothing are free when
positioning the tray for use.
16
SALSA M Mini
2
4.29.1 Seat stay
A seat stay is provided on your powered wheelchair to
provide access for service and maintenance. (see section
10 for additional information)
WARNING!
Do not move the wheelchair with the seat stay in place
and make sure you are on flat stable ground.

4.30 Mounting a kerb or step

WARNING!
Always approach a kerb at 90°
Approach the kerb (step) head on driving forwards slowly
and steadily and always at a 90° angle, (Fig.4.7).
Approach the kerb in a 90° angle and stop the wheelchair
as soon as the castor wheels touch the kerb.
Apply sufficient power to the motors to lift the front of
the wheelchair up onto the kerb (step) and then apply
slightly more power and speed so that the drive wheels
climb the kerb (step) smoothly and without hesitation
and the rear castor wheels come up as well. As far as
possible, keep the joystick in the straight forward position,
(Fig.4.10 - 4.11).
Note: In accordance to the ground clearance, the
maximum obstacle height possible to climb is 70 mm.
WARNING!
The approach speed and process can vary depending on
your wheelchair performance and castor wheel choice.
Fig. 4.10
Fig. 4.7
Fig. 4.11
Rev.3.0