Tolerance Check For Target Quantity - KERN KFB-TAM Instructions D'utilisation Et D'installation

7.7.2

Tolerance check for target quantity

Settings

Press and

Press until the display for entering the lower limit value
appears.

Press , the current setting will be displayed.

To enter the lower limit, e. g. 75 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.

Confirm input by

Press repeatedly until

Press , the current setting for the upper limit will be
displayed.

To enter the upper limit, e. g. 100 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.

Confirm input by

Press repeatedly until

Press and the current setting for the acoustic signal will
be shown.

Select desired setting (no, ok, ng) by

Confirm input by
30
at the same time in weighing mode.
.
is displayed.
.
is displayed.
.
.

KFB/KFN-TAM-BA_IA-e-1832